Search

Total: 15 results found.

Search for:
Search Only:

1. <span class="highlight">Circuit</span> <span class="highlight">Breaker</span> <span class="highlight">Types</span>&#160;...
(Wiring)
Your home will have multiple circuit breaker types. As the name implies they break the current for circuits in your home. This would happen for one of two reasons. One the circuit gets overloaded or a ...
Created on 13 July 2012
2. How To Replace a <span class="highlight">Circuit</span> <span class="highlight">Breaker</span>&#160;...
(Wiring)
When installing a new circuit breaker, the first thing you need to find out is who the manufacturer is. Breakers need to match the panel they are used in. Ideally you would take the name of the manufacturer ...
Created on 24 April 2016
3. Add a <span class="highlight">Circuit</span> <span class="highlight">Breaker</span>&#160;...
(Wiring)
Why would installing a new circuit breaker be a needed task? Circuit breakers do go bad from time to time. The other scenario would be adding a circuit to your panel. Finally putting the media room in ...
Created on 13 July 2012
4. <span class="highlight">Types</span> of Electrical <span class="highlight">Circuit</span>s&#160;...
(Wiring)
Basic house wiring can involve several types of electrical circuits and wiring configurations. A few types of circuits you might normally find in a home are described below along with reasons why they ...
Created on 13 July 2012
5. How To Wire Lights
(Wiring)
... be bad. The article 'Wiring a Light Switch', has more information on this subject. No power anywhere? This is bad, tracing circuits and tracking down basic wiring problems in a home is beyond the scope of  ...
Created on 19 April 2016
6. How To Wire a Light Switch
(Wiring)
...  Always double check, turn the breaker off and then use a tester to make sure nothing is hot. It is possible for more than one circuit to be fed through a single box. Faulty or incorrect wiring can ca ...
Created on 18 April 2016
7. How To Replace a Dimmer Switch
(Wiring)
... ause severe injury and even death. Be careful, make sure the power is off. Always double check, turn the breaker off and then use a tester to make sure nothing is hot. It is possible for more than one ci ...
Created on 18 April 2016
8. How To Turn On a Water Heater
(Water Heaters)
... .     (4) Turn on the circuit breaker for the hot water heater. Step One - Close Open Faucets If you were working on your hot water tank, you  should have opened a faucet to allow air to get into the  ...
Created on 16 March 2016
9. Troubleshooting Hot Water Heaters
(Water Heaters)
... circuit is installed for this purpose. Heating elements and thermostats are the leading causes of problems. .top_responsive_1 @media(min-width: 500px) } @media(min-width: 800px) } Troubleshooting ...
Created on 09 March 2016
10. Shutting Down an Electric Water Heater
(Electric Water Heaters)
... e in place whenever something the could cause physical harm. When electrical circuits are worked on, they need to be locked off and tagged to let anyone who has access to the panel know that the circu ...
Created on 17 July 2012
11. Home Electrical Repair
(Electrical)
...  topics discussed include: The 'main service panel', 'types of electrical circuits', 'types of electrical wiring', 'circuit breaker types', 'adding circuits to a home', 'replacing circuit breakers', 'ho ...
Created on 17 July 2012
12. Electric Hot Water Heater Troubleshooting
(Electric Water Heaters)
... on. Follow the links to get to the right information No Hot Water Check the circuit breaker first. Has it tripped? The breaker for the hot water heater should be a two pole breaker in your panel. The next  ...
Created on 14 July 2012
13. Doorbell Wiring
(Doorbells)
... n of the terms in this section, see 'How to Use This Site'. Check the Simple Things! - Check the circuit breaker to make sure it is not tripped. Loose wires on the buttons are the next thing. Two scre ...
Created on 14 July 2012
14. Main Service Panel
(Wiring)
... are hooked to the individual breakers, depending on the type of circuit. The breaker interrupts the hot wire, similar to what a light switch does. Some breakers are two pole, providing 240 volt current ...
Created on 13 July 2012
15. Basic House Wiring
(Wiring)
...  the job electricians use lock out tag out procedures to make sure circuits are not inadvertently turned on while they are being worked on. You turned off the switch, so everything is fine right? It is m ...
Created on 13 July 2012
Go to top