A bathtub drain repair is usually required when you have either a clog or a stopper that is malfunctioning.

There are (3) Key Topics associated with 'Bathtub Drain Repair', take a quick jump here or check out the overview below:

Checking the Bathtub Stopper Assembly - Broken linkage can cause the stopper to stay in the closed position, thus stopping the bathtub from draining.

Leaking Bathtub Drains - Leaks are never a good thing. Your bathtub has a couple of spots it can leak at.

Clogged Bathtub Drains - Find out where a clog is likely to occur and how to fix it.

It is pretty easy to figure out when you have a clog. The water won't go down, simple right? The stopper linkage could be broken and this will also cause the drain not to work. The other problem would be a leak. There are some places that a bathtub drain might leak.

There is always one villain that stands out from the rest. A sinister villain that causes much heartache. With a bathtub that villain is hair. Hair and soap put together and you have a recipe for a clogged drain.

Don't despair, many times the problem is easy to fix. Check out the information below and try to assess whether you are up for the task. The evaluation section will help you see what you can save and how hard it will be to do.

Bathtub Drain Repair - Finding Information

What Can You Save? - For a simple problem it could be $50. When the stopper assembly needs to be fixed, it could run more. Around $125. Most of the time it is simple and only takes a few minutes.

How Hard Could It Be? - Bathtub drain repairs can vary from easy to a little work and an hour or so of time. These repairs will have a Difficulty Level of: A Bit of Work. These repairs require a Skill Level of: Handyman. For and explanation of the terms in this section, see 'How to Use This Site'.

Check the Simple Things! - Hair in the strainer is the simplest one. Do you have people in the house with long hair? Take the strainer out with a screwdriver and check for hair.

What Can Go Wrong? - Do you want to be without a bathtub? Take it apart without getting is put back together and leave your home crippled. Using a snake can be messy and clogs involve water. Take precautions to deal with anything that can be damaged by water.

Troubleshooting Bathtub Drains

You have three things that could be wrong. One the stopper won't close or open. See Step One for instructions. The second item would be a leak. See Step Two for what to do when you have drips.

One item that causes trouble in a bathtub drain is the stopper assembly. There are some moving parts that can break. 'Checking the Bathtub Stopper Assembly' covered the issue and how to fix them.

Another common problem is a leaking bathtub drain. There are seal that can leak. 'Leaking Bathtub Drains' talked about what you can do to stop the leaks.

'Fixing Clogged Bathtub Drains' provided information on what to do if your bathtub drain is not working.



Bathtub drains are fairly simple to work on. The worst part is getting to the parts. Even with an access door they are pretty tight. Was it a simple clog or a broken cotter pin? That should not have been too difficult.

Or did you have an entrenched clog? No matter what you had to face in dealing with your bathtub drain repair, you are better for it. With your new strength of character you can move forward and accomplish great things.